| SR NO | PRODUCT NAME / TEST TYPE | STRENGTH / DETAILS | ACTION |
|---|---|---|---|
| 1 | IGC Test ASTM A 262 (Practice 'A') | Without Photograph | Enquire |
| 2 | IGC Test ASTM A 262 (Practice 'A') | With 3 Photographs | Enquire |
| 3 | IGC Test ASTM A 262 (Practice 'B') / ASTM G28 | Standard | Enquire |
| 3.1 | IGC Test ASTM A 262 (Practice 'F') | Standard | Enquire |
| 3.2 | G28 Ferric Sulfate-Sulfuric Acid Test | Method A (24 hours) | Enquire |
| 3.2.1 | G28 Ferric Sulfate-Sulfuric Acid Test | Method A (120 hours) | Enquire |
| 3.3 | G28 Mixed Acid-Oxidizing Salt Test | Method B | Enquire |
| 4 | IGC Test ASTM A 262 (Practice 'C') | Standard | Enquire |
| 5.1 | IGC Test ASTM A 262 (Practice 'E') | 15 Hrs. | Enquire |
| 5.2 | IGC Test ASTM A 262 (Practice 'E') | Upto 72 Hrs | Enquire |
| 5.5 | IGC Test ASTM A 262 (Practice E) | 15 Hrs. with metallography | Enquire |
| 6 | Hydrogen Induced Cracking Test (HIC) | Set of three Specimen (NACE TM 0284) | Enquire |
| 7.1 | SSCC Test (NACE TM 0177) | Method A: Tensile Test (single specimen) | Enquire |
| 7.2 | ASTM G39/ NACE TM0316 | Four Point Bend Beam (single specimen) | Enquire |
| 7.3 | SSCC Test Method C | C-Ring Test (single specimen) | Enquire |
| 7.4 | SSCC test with Curve plotting | Set of 5 specimen at various stress levels | Enquire |
| 8.1 | SSCC Test (720 Hrs) | At 90 Deg. C, 16 Bar | Enquire |
| 8.2 | SSCC Test (720 Hrs) | At 120 Deg C, 20 Bar | Enquire |
| 9 | SSCC Test (96 Hrs) | NACE TM 0177 (single specimen) | Enquire |
| 10.1 | Chloride Stress Corrosion (ASTM G 36) | MgCl2 at 155 Deg. C for 168 Hours | Enquire |
| 10.2 | Chloride Stress Corrosion (ASTM G 36) | CaCl2 at 100 Deg. C for 500 Hours | Enquire |
| 11 | Pitting Corrosion ASTM G 48:03 | 24 Hrs. | Enquire |
| 12 | Pitting Corrosion ASTM G 48:03 | 72 Hrs. | Enquire |
| 13 | Crevice Corrosion Test ASTM G 48:03 | 24 Hrs. | Enquire |
| 14 | Crevice Corrosion Test ASTM G 48:03 | 72 Hrs. | Enquire |
| 15 | Sensitizing Treatment | Standard | Enquire |
| 16 | Immersion Tests (ASTM G31) | Every 24hrs per specimen | Enquire |
| 16.1 | Autoclave Immersion Tests (ASTM G31) | High pressure and temperature (24hrs) | Enquire |
| 17 | Wet SO2 Test | 10 cycles of 24 hrs. Minimum | Enquire |
FAQ
At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate.
We provide ASTM A262 Practices A, B, C, E, and F, along with ASTM G28 corrosion testing.
Yes, IGC testing can be performed with or without photographic documentation, depending on your requirement.
Yes, Hydrogen Induced Cracking (HIC) and Sulfide Stress Corrosion Cracking (SSCC) tests are available as per relevant NACE standards.
